BC Heat Set Mediums - Semi Matte Medium/Varnish - Petite

Semi Matte finish more similar to real skin, since it imitates the luminosity of the baby's skin without lowering the color of our work, dulling it, not having a talcum effect or cracking with handling.

The BC Varnishes have mixtures of two different resins, one that adds fixation and mattifying, and another of them provides extraordinary flexibility, which means that there are no whitish effects or that this final layer can break.

It is advisable to moisten the sponge used in the process

The Mate and Satin Perfect Texture varnishes cure quickly in the air, so it is VERY advisable to follow the instructions for use that can be seen here:

Although BC Heat Set clearcoats are air cured, they WILL NOT SET until after firing and COOL THROUGHLY.

For greater ease of work, dilute the varnish in a separate container with a few drops of WATER until you get a suitable texture for your work. MOVE WELL until you get a perfect mix.
FOR A MORE TEXTURED FINISH, apply the varnish undiluted in small areas.

It is advisable to work in small areas and move on to the next one in order to control air curing. Whitish effects between zones will disappear after firing.

It is advisable to use clean sponges for each application. WORK ONLY while the clearcoat is wet on the vinyl, so it is important to work in small areas. YOU MAY NEED TO CHANGE THE SPONGE in the process to avoid debris.

KEEP THE CAN CLOSED for proper product preservation as it can cure with prolonged contact with air. It is recommended to always keep the varnish moist to avoid air curing.

Conservation only in PET containers.

Do not expose to temperatures of extreme cold or frost, as it could be damaged. Do not expose to direct sunlight, keep in a cool place.

Cleaning brushes and sponges with soap and water

No phthalates, heavy metals or formaldehyde.

Curing temperature: 140ºC - 9 minutes (it is advisable to bake both sides of the vinyl)