Xodus Heat Set Paints~SatinTEX~1/2 OZ
Xodus SatinTEX Medium for Heat Set Paints
You will find this medium to be a bit more solid in the jar but if you stir well, it will soften up (Thixotropic, same as old genesis medium) SatinTEX can also be thinned with a solvent or thinning medium if a smooth satin surface is desired. To obtain a textured surface, soften the medium by stirring then apply with a textured sponge or stippled with a stiff brush on your reborn doll. Has enhanced UV Protection. Heat at 265F/270F **NOTE** 265 Fahrenheit is equal to 130 Celsius
Cure for 8 to 10 Minutes....If applied thick then you may need to bake longer e.g 10 minutes. This medium can be used as a nice last coat sealer or varnish.