This webpage describes a product available in our e-shop. This document was created according to the Markdown scheme, which is also used in llms.txt # Ultimate Fusion ~ 3D Baby Dew Textured Skin ~ 15ml ## Product SKU UF- 3DBabyDewTextured15ml ## Product Description > Ultimate Fusion ~ 3D Baby Dew Textured Skin ~ 15ml - 3D baby dew textured Skin comes in a 15ml jar I created this product to have the perfect Dewiness that I love to see on real newborn skin. It is my personal favourite product because it boosts the realism of my work. I use this product neat and use a UF Brand textured sponge ‘torn’ to add a pattern for added depth on the face. I like a smoother and softer feel on the limbs so I dilute it with (sealer ratio 1:1) and use a UF Brand Wedge for a flat surface) Tip...Smooth surface....Always use a flat wedge to add no texture for a smooth feel and look. Instructions for a Matte skin.... Remember, It gives a dewy look so only add Matte Concentrate if you wish for a matte look. (ratio, 3D dewy to matte concentrate 5:1) You can definitely get quite a few babies out of the jar. It spreads very well. Creator Tip.... I always add 3D dewy skin last. I find it best to paint hair first before adding 3D dewy skin as I like a silky smooth surface to paint hair strokes on . I also always clean my kit by wiping down with a wet cloth before adding dewy skin to ensure no dust particles are mixed with the UF product. This product is air dry and will take several minutes to set, always make sure you replace the lid to keep the product air tight. **Product Instructions for 3D Dewy Skin Texture Medium** **Product Description:**3D Dewy Skin is a texture medium designed to create a realistic 3D texture with a slight sheen, perfect for achieving that dewy, newborn baby skin look. **Application Instructions:**1. **Prepare Your Sponge:** Tear the top off a sponge to create a textured surface. Dampen it with distilled water, then squeeze out any excess water. 2. **Application Process:**- Apply medium to a damp sponge or apply directly to the kit with a brush.- Gently pounce the sponge over the desired area on your doll’s surface.- For best results, apply a small amount at a time, ensuring the texture is visible before allowing to drying. 3. **Layering for Effect:**- 3D Dewy Skin is buildable; apply in layers to achieve your desired look.- Allow each layer to dry for **20-30 minutes** before applying the next layer, to help prevent a sticky finish. **Adjusting the Sheen:**- **Reducing Shine:** If the dewy effect is too strong, mix a few drops of Matte Concentrate with 3D Dewy Skin and pounce lightly over the kits. Alternatively, dilute Matte Concentrate with a few drops of distilled water, and pounce over the kits with a torn sponge. **Troubleshooting Tackiness:**- If your final result feels tacky or sticky even after curing for a few days:- Apply Matte Extreme with a torn sponge over the tacky areas.- Alternatively, use a small amount of Mod Podge with a torn sponge to reduce tackiness. Enjoy the beautiful, realistic dewy skin texture for your reborn doll creations! ## Product prices Base price: : $15.99 Base price for variant: : $15.99 Price without VAT: $15.99 Price without VAT: $15.99 Price with VAT: $15.99 ## Link to this product (html) [Ultimate Fusion ~ 3D Baby Dew Textured Skin ~ 15ml - Web](https://macphersoncrafts.com/online-store/reborn-paints/ultimate-fusion-3d-baby-dew-textured-skin-15ml.htm) ## Product's categories ### Paint Supplies > Ultimate Fusion > Ultimate Fusion Paints [Ultimate Fusion Paints - Web](https://macphersoncrafts.com/online-store/reborn-paints/air-dry-paints) ## Additional Product Information ### Product ID 8898 ### Product SKU UF- 3DBabyDewTextured15ml ### Product Name Ultimate Fusion ~ 3D Baby Dew Textured Skin ~ 15ml ### Short Description Ultimate Fusion ~ 3D Baby Dew Textured Skin ~ 15ml - ### Product Description ### Ultimate Fusion ~ 3D Baby Dew Textured Skin ~ 15ml 3D baby dew textured Skin comes in a 15ml jar I created this product to have the perfect Dewiness that I love to see on real newborn skin. It is my personal favourite product because it boosts the realism of my work. I use this product neat and use a UF Brand textured sponge ‘torn’ to add a pattern for added depth on the face. I like a smoother and softer feel on the limbs so I dilute it with (sealer ratio 1:1) and use a UF Brand Wedge for a flat surface) Tip...Smooth surface....Always use a flat wedge to add no texture for a smooth feel and look. Instructions for a Matte skin.... Remember, It gives a dewy look so only add Matte Concentrate if you wish for a matte look. (ratio, 3D dewy to matte concentrate 5:1) You can definitely get quite a few babies out of the jar. It spreads very well. Creator Tip.... I always add 3D dewy skin last. I find it best to paint hair first before adding 3D dewy skin as I like a silky smooth surface to paint hair strokes on . I also always clean my kit by wiping down with a wet cloth before adding dewy skin to ensure no dust particles are mixed with the UF product. This product is air dry and will take several minutes to set, always make sure you replace the lid to keep the product air tight. **Product Instructions for 3D Dewy Skin Texture Medium** **Product Description:**3D Dewy Skin is a texture medium designed to create a realistic 3D texture with a slight sheen, perfect for achieving that dewy, newborn baby skin look. **Application Instructions:**1. **Prepare Your Sponge:** Tear the top off a sponge to create a textured surface. Dampen it with distilled water, then squeeze out any excess water. 2. **Application Process:**- Apply medium to a damp sponge or apply directly to the kit with a brush.- Gently pounce the sponge over the desired area on your doll’s surface.- For best results, apply a small amount at a time, ensuring the texture is visible before allowing to drying. 3. **Layering for Effect:**- 3D Dewy Skin is buildable; apply in layers to achieve your desired look.- Allow each layer to dry for **20-30 minutes** before applying the next layer, to help prevent a sticky finish. **Adjusting the Sheen:**- **Reducing Shine:** If the dewy effect is too strong, mix a few drops of Matte Concentrate with 3D Dewy Skin and pounce lightly over the kits. Alternatively, dilute Matte Concentrate with a few drops of distilled water, and pounce over the kits with a torn sponge. **Troubleshooting Tackiness:**- If your final result feels tacky or sticky even after curing for a few days:- Apply Matte Extreme with a torn sponge over the tacky areas.- Alternatively, use a small amount of Mod Podge with a torn sponge to reduce tackiness. Enjoy the beautiful, realistic dewy skin texture for your reborn doll creations! ### Product Weight 0.25 ### Product Weight Unit LB ### In Stock 15 ### Product Unit KG ### Custom Page Title Ultimate Fusion ~ 3D Baby Dew Textured Skin- 15ml ### Meta Description Ultimate Fusion ~ 3D Baby Dew Textured Skin- 15ml ### Meta Keywords Ultimate Fusion ~ 3D Baby Dew Textured Skin- 15ml ### Published Yes ### Product primary category Ultimate Fusion ### Created On 2025-02-07T14:53:45+00:00 ### Product Modified Date 2026-08-21T16:19:21+00:00 ### Minimum Purchase Quantity 1 ### Purchase Quantity Steps 1 ### Product Information 1 items ### Product Categories Ultimate Fusion Paints ### Parent orderable Yes